فيبر قص ستانلس 5" سماكة 1 ملم

Cutting, grinding, and sanding discs from APT: 5, 7, 9, and 14 inches, for steel and stainless steel, and flap discs from 40 to 120 grit

, by عامر شوب, 2 min reading time

How to choose cutting fiber based on the material and thickness (1 to 4 mm), 6 mm grinding fiber, and flap discs (flap discs) made of aluminum oxide, zirconium, and ceramic, with grits from 40 to 120.

Thin cutting discs (1–4 mm) are for cutting only, while thick grinding discs (6 mm) are for smoothing and removing welds. For stainless steel, use thin Inox discs so they don’t overheat or rust.

5" 1 mm Stainless Steel Cutting Disc
5" 1 mm Stainless Steel Cutting Disc (APTP11251022)
5-inch 1 mm stainless steel cutting disc.

Cutting Discs

Product Model
5" 3 mm Steel Cutting Disc APTS21253022
5" 1 mm Stainless Steel Cutting Disc APTP11251022
9" 1.9 mm Stainless Steel Cutting Disc APTP12301922
5" 3 mm Steel Cutting Disc APTP21253022
9" 3 mm Steel Cutting Disc APTP22303022
14" 3.5 mm Steel Cutting Disc APTP13503525
14" 4 mm Steel Cutting Disc APTP13504025
5" 1.6 mm Stainless Steel Cutting Disc APTI11251622

Grinding Discs

Product Model
5" 6 mm Steel Grinding Disc APTS71256022
7" 6 mm Steel Grinding Disc APTS71806022
7" 6 mm Steel Grinding Disc APTP71806022
9" 6 mm Steel Grinding Disc APTP72306122

Flap Discs

Grit Use
40 Fast removal and welding
60–80 General smoothing
120 Finishing before painting

Zirconium and ceramic discs last longer on stainless steel and hard steel.

Product Model
5" Aluminum Oxide Flap Disc, 40 Grit, T29 DW423304
5" Aluminum Oxide Flap Disc, 60 Grit, T29 DW423306
5" Aluminum Oxide Flap Disc, 80 Grit, T29 DW423308
5" Aluminum Oxide Flap Disc, 120 Grit, T29 DW423312
5" Aluminum Oxide Flap Disc, 40 Grit, T27 PT960350426304
5" Aluminum Oxide Flap Disc, 60 Grit, T27 PT960350426306
5" Aluminum Oxide Flap Disc, 120 Grit, T27 PT960350426312
5" Zirconium Flap Disc, 40 Grit, T29 DW429304
5" Zirconium Flap Disc, 60 Grit, T29 DW429306
5" Zirconium Flap Disc, 80 Grit, T29 DW429308
5" Zirconium Flap Disc, 120 Grit, T29 DW429312
5" Ceramic Flap Disc, 60 Grit, T29 DW439306
5" Ceramic Flap Disc, 80 Grit, T29 DW439308

Tips from Amer Shop

  1. Do not use a cutting disc on its side for grinding, or it will break.
  2. Check the disc for the correct size and maximum speed rating.
  3. Always wear safety goggles and gloves.

Read also: Amer Shop is now the official distributor of APT in Jordan · APT Angle Grinders and Cutting Discs

Browse all APT products from Amer Shop, the official APT distributor in Jordan, with delivery to all governorates.

Request a quote for workshop consumables by the carton ‹

Tags


Blog posts