Air conditioners and air coolers.
Air Conditioners & Coolers
-
30.000 JD
-
VMD Air Conditioner Disinfectant 400 ml - VMD (VMD16)
Specifications Details Size 400ml Brand FMD Model Number Armored Vehicle 16 Description FMD 16 Disinfectant is a powerful disinfectant spray designed for use in the air conditioning systems of industrial and commercial vehicles and passenger vehicles. It effectively eliminates and prevents unpleasant odors caused by mold, microorganisms, and smoke residue. The product is easy to use: spray directly onto the air filters or into the air vents for a few seconds using the special nozzle, then leave it for a few minutes until the foam dissolves, then turn on the air conditioning system. ⚠️ Avoid contact with electrical components. Features Removes unpleasant odors from air conditioners Prevents the formation of mold and microorganisms Suitable for cars, homes, and industrial air conditioning systems Easy application using a special spray nozzle Sprays directly onto filters or into air vents Leave for a few minutes until the foam dissolves Turn on the air conditioning system after application Avoid electrical parts Product Type: Air Conditioner Disinfectant Capacity: 400 ml
4.000 JD
-
DECAKILA Air Cooler - Decakilla (KEFC012W)
Specifications Details Voltage 220-240V 50Hz Power 130W Airflow 5000 m³/h Coverage Area 10-20m² Control System Mechanical Water Tank 30L Evaporation Rate 3-4 L/h Product Dimensions 450*335*1000mm Brand Decakila Model Number KEFC012W Features One piece per carton, without printed box Packaging Carton box
125.000 JD
-
240.000 JD
-
Other Desert cooler 100 liters, 550 watts (0901452131)
Specifications Details Electrical Power 550W, 220~240V / 50Hz Airflow 18000m³/h Maximum Area 100–150m² Tank Capacity 100 liters with water level control Eco-Friendly Design No compressor, no gas, low energy consumption Dimensions 113x68x151cm Weight 58/63 kg (net/gross) Model Number HHB-180 Description Evaporative air cooler combining powerful performance with an eco-friendly design to cool areas of 100 to 150m². Features a built-in 100L tank for long operating times without frequent refilling, and a 550W motor with airflow of up to 18000m³/h, suitable for workshops, warehouses, halls, and outdoor spaces. Features Low-noise centrifugal fan Remote control for easy operation Integrated ionizer for air purification and renewal Handle and 144 mm wheels for easy movement Automated water supply system No installation required - plug and use
500.000 JD
-
Other Desert Cooler 72 Liters, 670 Watts (0901452132)
Specifications Details Power 670W Blower size 18" Air outlet 46cm Airflow 4390 CFM Wind speed 11.7 m/s Rotation speed 1350r/min Cooling area Up to 200 square meters Tank capacity 72L LED light 50 watts, low power and high brightness Model number BWC180460 Description This 18-inch evaporative cooling industrial fan provides powerful airflow and wide coverage, making it ideal for large indoor or semi-outdoor spaces. Equipped with a 72-liter tank and a 670-watt motor, it provides up to 200 square meters of cooling area with 3 adjustable speeds. Ideal for workshops, warehouses, or event areas, it includes a remote control, an indoor control panel, and a 50-watt energy-saving LED light. Features 3 variable speeds Water level indicator Remote control panel Built-in wheels for easy mobility Power cord storage feature Designed for industrial use
1,200.000 JD
-
Other 24 Inch Evaporative Cooler Fan, 630 W, 103 L (0901452133)
Specifications Details Output Power 630W Rated Current 2.95A Voltage 220–240V / 50Hz Airflow 192m³/min Water Tank Capacity 103L Air Outlet Diameter 24" (600mm) Noise Level 70–85dB Weight 62kg Model Number BWC240600 Description The 630W 24-inch (600 mm) evaporative cooling fan is a powerful industrial cooling solution designed for large spaces. With a 103-liter tank and powerful air output, it provides reliable cooling for workshops, warehouses, and outdoor environments. Its variable speeds and high airflow ensure efficient performance. Features Variable speed settings (1–3D) Designed to meet industrial and commercial cooling needs Securely packaged for delivery
1,400.000 JD
-
Other 36-inch Evaporative Cooler Fan, 1040 W, 225 L (0901452134)
Specifications Details Output Power 1040W Voltage 220–240V ~ 50Hz Rated Current 4.8A Fan Size 36" (900mm) Airflow 367 m³/min Tank Capacity 225L Speed Variable (1-3 speeds) Noise Level 65–80dB Remote Control Distance Up to 10 meters Weight 96kg Model Number BWC360900 Description This heavy-duty 36-inch misting fan is designed to circulate air powerfully in industrial spaces. With a 1040-watt motor and a massive 225-liter tank, it provides long-lasting, energy-efficient cooling. Ideal for factories, warehouses, outdoor events, and workshops. Features Built-in LED lights (50 watts) Water inlet and power cord storage Integrated wheels for easy mobility Bluetooth 5.0
1,800.000 JD
-
JADEVER Jadaifer 1500W Steam Air Conditioner Cleaner (JDSTC1501)
JADEVER 1500W Steam Air Conditioner Cleaner (JDSTC1501). Steam air conditioner cleaner.Technical Specifications Model: JDSTC1501 Brand: JADEVER Voltage: 220–240V ~ 50/60Hz Power: 1500W Tank Capacity: 1 liter Operating Pressure: 1–1.5 bar maximum Power Cord Length: 2.5 meters Heating Time: 15 seconds Contents: 1 accessory bag Packaging: Color box Uses Air conditioners Sterilization Maintenance Tips from Amer Shop Read the instructions before first use Do not overload it Clean it periodically with a cloth and mild cleaner 🔧 Usage and Safety Guide Usage: Use the product according to the manufacturer's instructions Safety: Keep it away from high heat and out of reach of children if necessary Maintenance: Clean it with a soft cloth and mild cleaner Order it now from Amer Shop with delivery to all areas of Jordan.
50.000 JD
-
DINGQI AC vent clip from Dinky
DINGQI Core Drill Bit. Core drill bits and accessories for drilling and cutting that fit on a drill, made from strong materials for clean and precise drilling.Technical Specifications Brand: DINGQI Material depending on the type (HSS / Cobalt / Carbide / Diamond) Sizes depending on the model Shank suitable for drills (Straight / SDS) Available Sizes and Types 65 mm 80 mm 100 mm Uses Core drilling in iron and wood Core drilling in concrete and stone Installing doors and locks (Hollow core) Tips from Amer Shop Choose the bit according to the material type Use cooling oil when drilling iron Reduce pressure and let the bit do the work 🔧 Usage and Safety Guide Usage: Read the operating manual and make sure the accessories are securely attached before operating Safety: Disconnect the power before changing accessories and wear safety glasses and gloves Maintenance: Clean the ventilation holes and inspect the cable and plug periodically Order it now from Amer Shop with delivery to all areas of Jordan.
14.400 JD - 21.600 JD
-
AC charging machine
Air conditioning refrigerant filling machine. Pressure gauge (manometer) for accurately measuring water, air, or gas pressure.Technical Specifications Model: HW-560 Material: Depending on the type (stainless steel / brass) Reading range depending on the model (bar / PSI) Glycerin filling depending on the type Threaded connection depending on the size Uses Pumps and compressors Water and fire lines Industrial lines Tips from Amer Shop Choose a reading range higher than the operating pressure Use Teflon tape on the threads Do not loosen it while the line is under pressure 🔧 Usage and Safety Guide Usage: Install the piece on pipes of the same size and connection type Safety: Check the line under pressure after installation and before actual operation Maintenance: Check the connections periodically and replace gaskets and washers when damaged Order it now from Amer Shop with delivery to all areas of Jordan.
1,368.000 JD
-
AC gas charging manifold gauge
Air conditioning refrigerant charging gauge. Pressure gauge (manometer) for accurately reading water, air, or gas pressure.Technical Specifications Model: 156516 Material: Depending on the type (stainless steel / brass) Reading range depending on the model (bar / PSI) Glycerin filling depending on the type Threaded connection depending on the size Uses Pumps and compressors Water and fire lines Industrial lines Tips from Amer Shop Choose a reading range higher than the operating pressure Use Teflon tape on the threads Do not loosen it while the line is under pressure 🔧 Usage and Safety Guide Usage: Install the piece on pipes of the same size and connection type Safety: Check the line under pressure after installation and before actual operation Maintenance: Check the connections periodically and replace gaskets and washers when damaged Order it now from Amer Shop with delivery to all areas of Jordan.
28.220 JD
-
Air conditioner hose adapter
Air Conditioner Connection Adapter. Pressure gauge (manometer) for accurately measuring water, air, or gas pressure.Technical Specifications Model: 9155651 Material: Depending on the type (stainless steel / brass) Reading range depending on the model (bar / PSI) Glycerin filling depending on the type Threaded connection depending on the size Uses Pumps and compressors Water and fire lines Industrial lines Tips from Amer Shop Choose a reading range higher than the operating pressure Use Teflon tape on the threads Do not loosen it while the line is under pressure 🔧 Usage and Safety Guide Usage: Install the piece on pipes of the same size and connection type Safety: Check the line under pressure after installation and before actual operation Maintenance: Check the connections periodically and replace gaskets and washers when damaged Order it now from Amer Shop with delivery to all areas of Jordan.
4.540 JD
-
Max A/C fan blade sizes
Max Drill Bit Sizes. Drill bits and accessories for drilling and cutting that fit on a drill, made from strong materials for clean and precise drilling.Technical Specifications Material depending on the type (HSS / Cobalt / Carbide / Diamond) Sizes depending on the model Shank suitable for drills (Straight / SDS) Available Sizes and Types 55*550 MM 65*550 MM 75* 550 MM Uses Drilling through iron and wood Drilling through concrete and stone Installing doors and locks (Hollow metal) Tips from Amer Shop Choose the drill bit according to the material type Use cooling oil when drilling through iron Reduce pressure and let the drill bit do the work 🔧 Usage and Safety Guide Usage: Read the operating manual and make sure the accessories are securely attached before operating Safety: Disconnect the power before changing accessories and wear safety glasses and gloves Maintenance: Clean the ventilation holes and inspect the cable and plug periodically Order it now from Amer Shop with delivery to all areas of Jordan.
50.400 JD - 78.620 JD
-
UNIOR Tomorrow's copper pipe flaring tool for car air conditioners, M10–TX50 sizes, by Unior (2209)
Unior A/C Compressor Pulley Puller (2209). A durable puller for removing bearings, pulleys, and press-fit components easily and safely. Available in several sizes; select the size you need, and the price varies accordingly.Technical Specifications Model: 2209 Brand: UNIOR (European-made, Slovenia) Official name: Alternator combination socket Material: Forged, heat-treated steel designed to withstand high forces Available sizes: M 10, TX 50 Uses Removing bearings, pulleys, and gears Automotive and industrial equipment maintenance Mechanical workshops Tips from Amer Shop Secure the puller arms firmly before applying force Use a suitable wrench on the puller screw and tighten gradually Apply grease to the screw thread to protect it 🔧 Usage and Safety Guide Use: Use the tool for its intended purpose and with the correct size Safety: Wear safety glasses and protective gloves while working Maintenance: Clean the tool after use and store it in a dry place
17.250 JD
-
RLT RLT air conditioner hole saw, multiple sizes
Hulso RLT air conditioner saw, a circular saw for cutting air conditioner and ductwork openings. Available in various sizes. Use: Air conditioner openings Sizes: Multiple Brand: RLT
8.780 JD - 12.150 JD
-
RLT RLT air conditioner fin, multiple sizes
RLT air conditioner drill bit, for drilling holes in walls for air conditioner piping. Available in several sizes. Use: Air conditioner installations Sizes: Multiple Brand: RLT
60.750 JD - 81.000 JD
-
12-meter AC pipe, various colors
Air conditioner tape 12 meters long in several colors, for wrapping and protecting air conditioner pipes and cables from the sun and dust, longer roll for long installations. Length: 12 meters Colors: Several colors
1.000 JD
-
10-meter AC pipe, various colors, high quality
Air conditioner tape 10 meters long in several colors, high quality, for wrapping copper pipes and the air conditioner cable between the indoor and outdoor units. Length: 10 meters Colors: Several colors Category: High quality
0.750 JD







