همر التكسير

Rotary hammer (rotary hammer): from 3 kg to 30 kg, how many kg and how many joules do you need?

, by عامر شوب, 5 min reading time

Removing tiles or breaking concrete? 6 kg or 16 kg? A simple guide to choosing the right demolition hammer for the job, with a comparison table of the rotary hammer, hex-shank rotary hammer, petrol hammer, and pneumatic hammer.

Want to open a door in a wall, remove old tiles, or break up a concrete floor? Doing it with a hammer and chisel will take days and wreck your back. A demolition hammer (rotary hammer or jackhammer) gets the job done in hours. But 6 kg or 16 kg? 15 joules or 50? A small hammer will wear you out and do little on a thick concrete slab, while a large one will cause more damage than necessary to a thin wall.

In short: For removing tiles, light demolition, and drilling small holes, choose a 1200–1300-watt rotary hammer or a 6–7 kg (15–20 joules) rotary hammer. For breaking up walls and standard concrete slabs, choose a 10–16 kg (30–45 joules) rotary hammer. For reinforced floors and heavy demolition, choose a 17–30 kg (50 joules and above) rotary hammer. For jobs without electricity, choose a gasoline or pneumatic rotary hammer.
Size Approx. joules Work
Rotary hammer — Tile removal, plastering, installations
6–7 kg 15–20 Light demolition, small holes
10–16 kg 30–45 Brick walls and standard concrete slabs
17–30 kg 50 and above Reinforced floors, heavy demolition

🔨 Rotary hammer

A small demolition hammer you hold with both hands. It is used for installations, removing tiles, and removing plaster, and works on walls as well as floors.

💥 Rotary hammer (hex shank)

It has a hex shank and thick chisel bits. Weight is an advantage here: the heavier it is, the stronger the impact and the less effort you need to exert on the floor. “Modern” and “traditional” models differ in body shape and grip, so choose the one that is most comfortable for your hand and work.

❌ Common mistake: Breaking concrete with a rotary hammer without wearing safety glasses, gloves, and ear protection. Debris flies and the noise is extremely loud. Wear safety boots as well, because if a heavy rotary hammer falls on your foot, it can cause injury.

⛽ Gasoline and pneumatic

Gasoline rotary hammers are for remote sites without electricity. Pneumatic rotary hammers run on an air compressor and are used for breaking and driving.

📋 All our rotary hammers

Rotary hammer Weight / Power Note
Vido WD011410175 1200 watts SDS Plus rotary hammer
Total TH2130016 1300 watts Rotary hammer
4-bolt rotary hammer — Rotary hammer
Boss Pro — Rotary hammer
APT DW12D 6 kg, 15 joules 1300-watt hex shank
Dailo DTDB1D45 15 joules —
APT DW15D 7 kg, 20 joules 1300-watt hex shank
APT DW23 10 kg, 30 joules 1700-watt hex shank
APT DW45 14 kg, 45 joules 1700-watt hex shank
Total TH215456 45 joules 1700 watts
Vido WD011420600 16 kg 1500 watts, modern design
Vido WD011430600 16 kg 1500 watts, traditional design
Beauty 16 kg 1500 watts
APT DW63 17 kg 1700-watt hex shank
Total TH217068 50 joules 1700 watts
Dailo DTDB1D90 50 joules —
Dailo DTDB1D80 — 1600 watts
Dailo DTDB2D95 — 1950 watts
Demolition hammer — 2500 watts
Green demolition hammer — 2500 watts
160 mm rotary hammer 25 kg —
APT IN50C 30 kg 2200-watt brushless
95 mm demolition hammer — —
65 mm demolition hammer — —
Pro Max gasoline — Gasoline
Pneumatic rotary hammer — Pneumatic
Jadair JDAT4515 — Pneumatic with chisel
Unior pneumatic demolition hammer — Pneumatic

Unior pneumatic demolition hammer parts: 182×18 bit, 180×2 bit, 69 mm spring, 351 mm adapter. You can find cordless rotary hammers in the [cordless rotary hammer guide].

Frequently Asked Questions

Joules or watts?

For demolition, joules are more important. Two rotary hammers with the same wattage can differ greatly in impact force.

Which chisel do I need?

Pointed chisels for breaking and opening, and wide chisels for removing tiles and plaster. See the [chisel guide].

Read More

Demolition project? Request a quote or message us on WhatsApp.

Tags


Blog posts