مضخة غاطسة 2 انش مع فرامة من هنز

Submersible Pumps: Clean Water, Sewage with Grinder, Drainage, and Artesian Wells, from Haco, Hanz, Dinky, and Wedon

, by عامر شوب, 1 min reading time

Submersible Pump Guide: The difference between clean water submersible pumps and sewage grinder pumps for wastewater and sewers, artesian well pumps, and how to choose based on depth and water type.

The submersible pump is placed inside the water, so it doesn't need priming and you won't suffer from suction problems. But you must choose the type according to the water: clean, cloudy, or sewage.

Types

  • Clean water submersible: For emptying tanks, ponds, basements, and irrigation from tanks.
  • Submersible with grinder: It grinds dirt and small solid materials, for wastewater, septic tanks, and sewage.
  • Artesian well pump: A long, thin body that goes down into the well, to lift water from great depths.

Clean water

Wastewater and sewage (grinder)

Artesian wells

Which one should I choose?

  • Emptying a tank or basement with water: Clean water submersible
  • Septic tank or sewage: Grinder submersible
  • Well: Artesian pump according to the depth

Tips

  1. Do not operate the submersible pump outside the water.
  2. Hang it with a rope and do not hang it by the electrical cable.
  3. The float must move freely to turn off the pump when the water runs out.
  4. For sewage, wash the pump with clean water after use.

Available at Amer Shop in Jordan.

Tags


Blog posts