Winch and Crane Remotes: Single-Phase and Three-Phase Wireless Remotes, Two-Way and Four-Way Remotes—How to Choose the Right Remote
, by عامر شوب, 1 min reading time
Guide to crane and hoist remote controls: wired and wireless remotes, single-phase and three-phase, number of movements, and industrial remotes for overhead cranes.
The remote is the part of the hoist that gets damaged and breaks most often. The good news is that you can easily replace it or convert the hoist to wireless and control it remotely more safely.
Wired or wireless?
- Wired remote: Simple and inexpensive, and it doesn't need batteries, but you have to stand close to the hoist.
- Wireless remote: You can operate it from a safe distance and see the load from a better angle, which reduces the risk of the load falling on you.
1-phase or 3-phase?
It must match the hoist's electricity. Home and small site hoists are usually 1-phase, while industrial hoists and cranes are 3-phase.
Wired remotes
- 2-motion hoist remote: Up and down.
- 2-motion hoist remote with stop: It has an emergency stop button.
- 4-motion hoist remote: Up, down, left, and right for mobile hoists.
- Hoist up/down switch remote
- Electric chain hoist connector
Wireless remotes
| Model | Electricity |
|---|---|
| F21-E1 | 1-phase |
| F21-6S | 1-phase |
| 8D | 3-phase |
| 10D | 3-phase |
Industrial crane remotes
Power YTK-SF6+, DOUKI KI, and industrial crane operating remote: For overhead cranes in factories and warehouses.
Which remote should I choose?
- Home hoist or small site: 2-motion wired remote with stop
- You want to control it remotely: 1-phase wireless
- Industrial hoist or crane: 3-phase wireless or industrial remote
Safety tips
- Disconnect the power before installing or replacing the remote.
- Choose a remote with an emergency stop button.
- Never stand under a raised load.
- Installation on the hoist panel must be done by a qualified electrician.
Available at Amer Shop in Jordan.