بريصة 3 أصابع توتال

Guide to Pry Bars and Levers: Bars, Pulleys, Cars, and Wheelbarrows

, by عامر شوب, 6 min reading time

Two-finger pliers or three-finger pliers or needle-nose pliers? And which pry bar for which job? With a table of all pliers and pry bars.

The axle that is "stuck" to the column, the pulley that won't come out, and the tire that needs to be removed… all this is the work of pullers and pry bars. Hitting with a hammer damages the part and the column, while a puller pulls with distributed force and smoothly.

In short: axle and pulleys, two-jaw or three-jaw puller larger than the part. Axle inside a sleeve puller set (NTACH). Specific car work (wipers, axle, wheel, steering column) specialized puller. Removing tires and bolts tire pry bar. Heavy lifting and moving long iron pry bar. And rims and tires tire pry bar.

🧲 How to choose a puller?

Type For work Note
Two-jaw Axle and pulleys in a tight space Easier to install
3-jaw Axle and pulleys that need balanced pulling More stable and doesn't slip
Puller (NTACH) Axle inside a sleeve or housing Grips from the inside
Specialized car pullers Wipers, axle, wheel, steering column, brake caliper One part for each job
💡 Size: The puller number (e.g., 4 or 6 inches) is the maximum jaw opening. Choose a puller with an opening larger than the part's diameter, and a depth longer than the distance you want to pull.

🪓 Pry bars

Tire pry bar short and flat for removing wood and nails, and long iron pry bar (600–1000 mm) for lifting and moving heavy objects, and tire pry bar for installing and removing tires. The longer the pry bar, the less force you need.

❌ Common mistake: Putting a pipe on the puller handle to pull harder, or pulling with the jaws not properly secured. If the puller doesn't pull, spray rust remover and wait, or heat the part; excessive pressure breaks the jaws and throws them.

📋 All pullers and pry bars

General pullers (two-jaw and three-jaw)

Puller (NTACH) and axle

Specialized car pullers

Pry bars

Read more

Not sure which puller to choose? Send us a picture of the part on WhatsApp.

Tags


Blog posts