ماكينات CO2 وأرجون وبلازما

CO2, Argon, or Plasma? Which welding machine is right for any metal and any job?

, by عامر شوب, 6 min reading time

CO2 for speed, argon for stainless steel and aluminum, plasma for cutting, and stick welding for sheet metal: a simple guide to the differences between welding types, with a table of all available machines.

The welder who welds with a stick stops every now and then to change the electrode and chip away the slag. The one who welds with CO2 moves in one long, clean line. And the one who welds with argon produces stainless steel welds that shine as if they were cast. Every metal and every job has its machine, and the difference in speed and appearance is huge.

In short: Steel in large quantities and at high speed (doors, hangars, chassis)? CO2 / MIG. No gas cylinder? Gasless Flex. Stainless steel, aluminum, and clean welding? Argon TIG. Fast steel cutting? Plasma. Thin sheet metal and assembly? Spot welding. Factories and high precision? Laser.
Type Welds Speed Weld appearance Needs gas?
MMA Steel Slow Slag must be chipped away No
CO2 / MIG Steel and stainless steel Very fast Clean CO2 or a mixture
Gasless Flex Steel Fast Slight slag No
Argon TIG Stainless steel, aluminum, copper Slow Cleanest Argon
Spot Thin sheet metal Instant Spots No

🔵 CO2 / MIG Machines

Wire wound on a spool feeds out automatically, and the gas protects the weld. There is no changing rods or chipping slag, so the work is much faster. "Gasless" (Flex) models work with a special wire without a cylinder, excellent for working outdoors.

✨ Argon TIG Machines

A precise arc with a tungsten electrode and wire you feed by hand, and argon protects the metal. The cleanest welding for stainless steel, kitchens, and food-grade pipes. For aluminum, you need a machine dedicated to aluminum.

❌ Common mistake: Welding stainless steel with regular steel wire. The weld will rust and show. For stainless steel, use stainless steel wire (308 or 316) and argon. See [Wire and Gas Guide].

⚡ Plasma, Spot, and Laser

Plasma cuts steel, stainless steel, and aluminum with a compressed air arc, faster and cleaner than a grinder, and it needs a compressor. The number (12, 20, 35, 50 mm) is the maximum cutting thickness. Spot welding holds two sheets together with a spot, for sheet metal and cabinets. Laser for factories: very high speed and precision.

📋 All CO2, Argon, and Plasma Machines

Machine Type Note
Eldon YTF-7 CO2 1 kg spool
Eldon MIG-250 CO2 1 phase
Exkort CO2 —
Exkort MIG-MAG-MMA-301 CO2 + electric —
Kasper MMA/MIG CO2 + electric —
Beauty CO2 5 kg spool
Beauty 320 Amp MIG —
Blue CO2 500 Amp CO2 3 phase
APT PRACTIC-350 MIG 350 Amp, 3 phase
Total TFC13018 Gasless Flex 130 Amp
Gadavir JDWFC1303 Gasless Flex —
Gadavir JDGTMWA25 MIG/MMA/TIG 250 Amp
CO2 + Argon CO2 + Argon —
APT FORCE-220 TIG/MMA 180 Amp
APT WS-200 TIG/MMA 200 Amp
Eisab Steel + Argon TIG/MMA 200 Amp, without torch
APT SOLDA-415DV TIG/MMA 250 Amp, 220/380
Exkort TIG/MMA-250G TIG/MMA 250
Eldon TIG-250 TIG/MMA 250
Argon + electric TIG/MMA 250
Argon + steel TIG/MMA 250
APT SOLDA-450SV TIG/MMA 280 Amp
Argon Aluminum and Stainless TIG Aluminum
Aluminum 250 Amp Aluminum —
Industrial Aluminum 250 Amp Aluminum —
Stainless Steel Welding Machine Stainless steel —
Total TCUT401 Plasma 40 Amp
Eldon CUT-40E Plasma 12 mm, 1 phase
Eldon CUT-60 Plasma 20 mm, 1 phase
Eldon CUT-100 Plasma 35 mm, 3 phase
Eldon CUT-120 Plasma 50 mm, 3 phase
Beauty Plasma —
Gadavir JDSWD081 Spot 8 kVA
Spot welding Spot 1.5 + 1.5 mm
Foot pedal spot welding Spot —
1500 Watt laser Laser —
3000 Watt laser Laser —

Frequently Asked Questions

Does CO2 need 3-phase electricity?

Small and medium ones are usually 1 phase. Large ones (350–500 Amp) are usually 3 phase. Check the model specifications.

What do I need with a CO2 machine?

A CO2 gas cylinder with a regulator, a wire spool in the appropriate diameter (0.8 or 1 mm), and torch cables. Or a gasless Flex machine.

Does plasma need a compressor?

Most of them need clean and dry compressed air. Read [Compressor Guide].

Read more

Unsure between CO2 and argon? Send us a message on WhatsApp with the metal and the job.

Tags


Blog posts