أسياخ وأسلاك اللحام

Welding rods and wires, regulators, and torches: 6013 or 7018? And with or without gas?

, by عامر شوب, 7 min reading time

6013 or 7018? CO2 cylinder with gas or Flux-Cored? Which TIG wire for stainless steel and aluminum? Welding supplies guide, with tables for rods, wires, regulators, torches, and cables.

The best welding machine won't give you a clean weld if the rod is damp, the wire is wrong, or the gas regulator is leaking. A large part of the welding quality comes from the machine, and a large part comes from what you put into it. In this guide, we talk about electrodes, CO2 and argon wires, regulators, and the handles and cables that connect all this together.

In short: General steel and gates 6013 rod. Construction and resistant steel 7018. Stainless 308 / 309 / 316. CO2 0.8 or 1 mm spool (with gas or flux without gas). Argon ER70S-6 for steel, ER4043 for aluminum, 308/316 for stainless.
Number For Work Note
6013 General steel, gates, windows Easy and calm arc, for beginners
7018 Construction and resistant steel Stronger weld, must be kept dry
308 / 309 / 316 Stainless 316 for water and chemicals
ER70S-6 Steel (CO2 or Argon) Most commonly used
ER4043 Aluminum For aluminum machines
HS221 Copper and bronze —

🔩 Electrode (Rod)

❌ Common mistake: Leaving the rods (especially 7018) in moisture or on the ground. A damp rod causes bubbles and cracks in the weld. Store them in their closed box in a dry place, and professionals use a rod heating heater.

🧵 CO2 and Argon Wires

Spool «with gas» solid wire that needs a CO2 cylinder. «Without gas» (flux) hollow wire with a protective material inside, it doesn't need a cylinder. And argon wires are rods that you feed by hand.

⏱️ Gas Regulators

The regulator reduces the cylinder pressure to the working pressure and shows you the amount. Every gas has its regulator: Argon, CO2, Oxygen, Acetylene. And a CO2 regulator in winter can freeze, so there is a CO2 timer with electric heating.

🔌 Handles, Cables, and Angles

Choose the handle according to your machine's amperage or higher, because a weak handle gets hot. The coupling connects the cable to the machine quickly. And magnetic angles hold the pieces at 45 and 90 degrees while you weld.

📋 All Welding Supplies

Electrodes and Wires

Gas Regulators and Timers

Handles, Cables, Angles, and Tools

Read More

Not sure which rod or wire to use? Send us a message on WhatsApp with the type of metal and machine.

Tags


Blog posts