وجه لحام ومعدات حماية

Electronic or standard welding helmet? A guide to gloves, goggles, and welding protection equipment

, by عامر شوب, 6 min reading time

Welding flash hurts the eyes: A guide to choosing an electronic or regular welding helmet, the lens shade number, gloves, apron, and protectors, with tables of all available protective equipment.

A few seconds without a welding face shield is enough. At night, your eyes feel like they're full of sand, and you stay up from the burning sensation. That's "welder's flash," and many welders have gone through it. The welding arc emits ultraviolet rays, heat, and sparks, and protection is not a luxury: a welding face shield, leather gloves, an apron, and goggles.

In short: For the welder who welds a lot, an electronic welding face shield (auto-darkening) darkens on its own the moment the arc strikes. For light use, a regular face shield with a black filter. For the hands, long leather gloves. For argon welding, thin argon gloves for finger sensitivity.
Regular face shield Electronic face shield
Filter Fixed black Darkens on its own instantly
Before welding You see a little, you lower it by hand You see clearly
Precision Lower Higher, you see the starting point
Price Cheaper More expensive
Best for Intermittent work Daily welding

🥽 Welding face shields and goggles

The filter number (shade level) increases with the amperage: around 10–11 for regular electric welding, and higher for high amperages. Welding goggles for cutting with oxygen and flame and light work are not a substitute for a face shield in arc welding.

❌ Common mistake: Welding a "small touch" without a face shield, or looking closely at someone else's welding. Even seconds can harm the eyes. And those around you also need protection: use a welding curtain or keep them away.

🧤 Welding gloves

Long leather protects up to the elbow from sparks and heat. Argon gloves are thinner, so you can feel the welding wire between your fingers.

🦺 Clothing and protectors

The leather apron protects your chest and legs, and the shoe protector prevents sparks from getting inside the boots, and the head protector for welding over the head. And do not wear nylon clothes, because they melt onto the skin.

📋 All our welding protection equipment

Welding face shields

Goggles and Filters

Product Note
APT DW-WGA1 Automatic
Vido WD817710000 —
Total TSP9405 Auto-darkening
Total TSP9401 Auto-darkening
Total TSP9403 Electronic Flip
Total TSP303 Shade 8
Total TSP307 —
Dailo DTWA1501 Electronic
Dailo DTSG3808 Black
Dailo DTSG3811 Flip
Beauty Electronic
Ipeca Flip Electronic
Ipeca Yellow Submarine —
Welding Goggles —
Black Goggles —
Vorteks Black —
Vorteks Clear —
Black Filter Number 11 110×90 mm
Clear Welding Filter —
Wide Filter —

Gloves and Clothing

Frequently Asked Questions

What filter number do I need?

Regular electric welding is usually around 10–11, and higher amperages require a higher number. Many electronic face shields can be adjusted to multiple settings.

Does the electronic face shield run on batteries?

Many run on a solar cell, a small battery, or both. Check the model specifications.

Read More

For general safety equipment, read [Vido Safety Equipment Guide].

Tags


Blog posts